Electrical Components

CK1033-6 - Black Heat Shrink Tubes

Use these larger, heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to about 1/2 the original size when heated. Rated wire size and applications are:CK1033-6 (3/16" inside diameter)...

CK1033-5 - Black Heat Shrink Tubes

Use these larger, heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to about 1/2 the original size when heated. Rated wire size and applications are:CK1033-5 (3/32" inside diameter)...

CK800C - Canopy

CK800C is the brass colored replacement canopy with embedded nail designed for use with Cir-Kit Concepts' CK800 Ceiling Canopy, which makes any chandelier removable with just a "twist of the wrist". A quarter turn clockwise for installation and a quarter...

MH44007 - Petite Wall Plugs

The petite or "to scale" MH44007 plug is made to work with the MH44005 outlet and may be attached to the bulb wires from any 12-volt miniature lighting fixture. To make an electrical connection, stripped lamp wires are simply inserted into small...

MH44005 - Petite Double Wall Outlets

One of the smallest working outlets for dollhouse and miniature settings, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The MH44005 outlet nails are embedded diagonally, allowing the outlet to be mounted vertically regardless of whether...

CR2S701-1CS- Six Amp Power Connector w/Switch

This simple junction or 6 amp power connector with on-off switch makes a solid electrical connection from the power supply plug to your dollhouse or display and has the added protective feature of a fast blow fuse. It comes with double stick tape on the...

CR2S701-1BS - 2 Amp Power Connector w/Switch

This junction or 2-amp power connector with on-off switch makes a solid electrical connection from the power supply plug to your dollhouse or display and has the added protective feature of a fast blow fuse. It comes with double stick tape on the back as...

CR2S701-1AS - 1 Amp Power Connector w/Switch

This simple power (or junction) connector makes a solid electrical connection from the power supply (often referred to as the transformer) to your dollhouse or miniature display. It has the added protection feature of a fast blow fuse. The fuse should be...

MH655 - Single Receptacle, Four Pack

Sold four per package, this single receptacle with 8" white wire and standard plug extends your one-inch (1:12) scale dollhouse miniature lighting access just like an extension cord in your real life house.  Designed for use with standard plugs such...

CR2S729-2 - Subminiature Pin Connectors

Package of 4 small pin connectors with 8", 28 AWG Kynar wire leads on each end.  It is the perfect way to easily connect and disconnect a light or display module you wish to remove periodically. Excellent option for: stacked floor...

Three-Foot Extension Cord

This three-foot cable extends the distance from your power supply to the dollhouse.  The plug and jack each measure about 5.5mm x 2.1mm. The wire cable has been upgraded to 18 awg capable of carrying a full 6 amps of current.

CR2S707-9 - One to Three Splitter

This cord is designed to power three different displays from one power supply.  It simply splits the output plug of the power supply into three separate plugs.  The wire cable has been upgraded to 18 awg which is capable of carrying a...