Electrical Components

CR2S701-1AS - 1 Amp Power Connector w/Switch

This simple power (or junction) connector makes a solid electrical connection from the power supply (often referred to as the transformer) to your dollhouse or miniature display. It has the added protection feature of a fast blow fuse. The fuse should be...

MH655 - Single Receptacle, Four Pack

Sold four per package, this single receptacle with 8" white wire and standard plug extends your one-inch (1:12) scale dollhouse miniature lighting access just like an extension cord in your real life house.  Designed for use with standard plugs such...

CR2S729-2 - Subminiature Pin Connectors

Package of 4 small pin connectors with 8", 28 AWG Kynar wire leads on each end.  It is the perfect way to easily connect and disconnect a light or display module you wish to remove periodically. Excellent option for: stacked floor...

Three-Foot Extension Cord

This three-foot cable extends the distance from your power supply to the dollhouse.  The plug and jack each measure about 5.5mm x 2.1mm. The wire cable has been upgraded to 18 awg capable of carrying a full 6 amps of current.

CR2S707-9 - One to Three Splitter

This cord is designed to power three different displays from one power supply.  It simply splits the output plug of the power supply into three separate plugs.  The wire cable has been upgraded to 18 awg which is capable of carrying a...

CK804 - Ceiling Fixture Adapter, 15/32" Diameter

The CK804 ceiling fixture adapter is 15/32" in diameter.  Thanks to Cir-Kit Concepts, chandeliers can be made removable using the ceiling plate that is part of most chandelier designs.  The secret of these adapters lies in the use of specially...

MH692 - 12V, Six Flame Bulbs on 8" Wires

This one-inch (1:12) scale dollhouse miniature 12-volt flame tip bulb on 8-inch white wire; package of 6.

CK1010-5 - 12V Wire Terminal Bulb

The CK1010-5 bulb is designed for special applications where regular GOW and GOR type bulbs may not be suitable. This bulb allows a practical and most cost effective means of providing light in a multitude of different applications. It may be used alone...

CK1010-16 - 3/16" Candle Socket

CK1010-16 is a 3/16" candle socket with 12" white wire that easily accommodates a bi-pin bulb. Create your own chandeliers or use these candle sockets to create a candle in your dollhouse windows. Just remember, you will need to drill holes into the...

CK1008-4 - Power Strip with Switch & Fuse

CK1008-4 is a 12-volt power strip with switch and 2-amp fuse that allows you to plug in 12 fixtures.  From Cir-Kit.  Unit (excluding lead-in wire) is approximately 7-1/2" high x 3/4" wide x 1/4" thick.  It can handle up to 32...

CK804-1 - Ceiling Fixture Adapter (19/32" diameter)

The CK804-1 ceiling fixture adapter is 19/32" in diameter.  Thanks to Cir-Kit Concepts, chandeliers can be made removable using the ceiling plate that is part of most chandelier designs.  The secret of these adapters lies in the use of...

CK800 - Brass Ceiling Canopy with Eyelet

The Cir-Kit Concepts' CK800 Ceiling Canopy makes any chandelier removable with just a "twist of the wrist". A quarter turn clockwise for installation and a quarter turn back for removal. Nothing could be simpler! And the rich plating will compliment even...