US Dollars
Canadian Dollar
Euro
UK
Icelandic Króna
Russian Ruble
Swedish Krona
South African Rand
Product Description
One-inch (1:12) scale dollhouse miniature, genuine kiln-fired, common red bricks mounted on a mesh sheet that covers approximately 72 square inches from Miniature House. Sheet is about 11-3/4"long by 5-3/4" wide. Each brick on the sheet is approximately 1/4" high by 3/32" thick by 23/32" wide.
Installation Instructions:
Apply only to properly prepared surfaces. Clean and/or prime surfaces to insure that they are free of oil or dirt residue before beginning. Ensure that alignment of brick sheet is correct, mark surface to be covered with a square and pencil, indicating the horizontal and vertical lines within which you plan to place the brick sheet. Apply an even, generous coating of adhesive to the surface to which the brick sheet will be attached. Apply the brick sheet to the surface with the first course of bricks lined up along the edge (where appropriate) and following all pencil markings to assure proper alignment. Where necessary, trim backing from brick sheet with a knife or scissors and cut excess bricks evenly with a tile nipper. Allow adequate time for adhesive to dry completely. Then grout with tile grout and sponge. Remove grouting from facing of bricks with a clean damp cloth.
