Electrical Components

CK1010-34 - Candle Flame Socket

The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb, CK1010-31 Grand Chandelier Candle-body Bulb, and CK1010-32...

CK1010-29 - Screw Base Candle Flame

The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by Cir-Kit Concepts.  

CK1010-17B - 7/16" Candle Socket

CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs such as CK1010-12, MH44013, or CR2S1010 or any of the...

CK1010-12 - 12V Micro Flame Bulb

The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are perfect for chandeliers, sconces, candle-bodies or anywhere a...

CK1007-1 - Junction Splice Extender

If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007) and run the cord out for mating with the lead-in wire...

CK1004-3 - Male Plugs (6 pack)

Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps.  Substitute for MH658.  Use with pound-in receptacle (outlets) CK1003-1, MH776 or MH776X.   

CK1004 - Electrical Plug

The "to scale" CK1004 plug is made to work with the CK1003 outlet and may be attached to the bulb wires from any lighting fixture. To make an electrical connection, stripped lamp wires are simply inserted into small holes in the side of the plug and the...

CK1003A - Duplex Outlet Cover

Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used. The double holes allow ample space for inserting and...

CK1003 - Duplex Wall Outlet (receptacle)

To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be mounted vertically regardless of whether the tape run is...

CR2S908 - Snap On/Off Switch

This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16" high. The center button is just 3/16" in diameter.

CR2S907-2 - 1/16" Shrink Tubes

Package of 100 pieces of 1-3/4" long 1/16" shrink tube.  Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections.  Acts as an insulation jacket to protect two bare wires from shorting out.

CR2S701-2 - Junction Strip

The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle switch and a set of 12 connection blocks to wire...