Quick view Details Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb MSRP: Now: £2.22 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket MSRP: Now: £1.86 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame MSRP: Now: £4.47 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket MSRP: Now: £2.62 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb MSRP: Now: £2.97 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender MSRP: Now: £3.72 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) MSRP: Now: £5.60 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover MSRP: Now: £2.22 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) MSRP: Now: £3.36 Add to Cart Compare Quick view Details CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch MSRP: Now: £3.75 Add to Cart Compare Quick view Details CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes MSRP: Now: £1.87 Add to Cart Compare Quick view Details CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip MSRP: Now: £22.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Details Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket MSRP: Now: £1.86 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame MSRP: Now: £4.47 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket MSRP: Now: £2.62 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb MSRP: Now: £2.97 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender MSRP: Now: £3.72 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) MSRP: Now: £5.60 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover MSRP: Now: £2.22 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) MSRP: Now: £3.36 Add to Cart Compare Quick view Details CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch MSRP: Now: £3.75 Add to Cart Compare Quick view Details CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes MSRP: Now: £1.87 Add to Cart Compare Quick view Details CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip MSRP: Now: £22.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Details Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame MSRP: Now: £4.47 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket MSRP: Now: £2.62 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb MSRP: Now: £2.97 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender MSRP: Now: £3.72 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) MSRP: Now: £5.60 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover MSRP: Now: £2.22 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) MSRP: Now: £3.36 Add to Cart Compare Quick view Details CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch MSRP: Now: £3.75 Add to Cart Compare Quick view Details CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes MSRP: Now: £1.87 Add to Cart Compare Quick view Details CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip MSRP: Now: £22.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Details Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket MSRP: Now: £2.62 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb MSRP: Now: £2.97 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender MSRP: Now: £3.72 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) MSRP: Now: £5.60 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover MSRP: Now: £2.22 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) MSRP: Now: £3.36 Add to Cart Compare Quick view Details CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch MSRP: Now: £3.75 Add to Cart Compare Quick view Details CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes MSRP: Now: £1.87 Add to Cart Compare Quick view Details CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip MSRP: Now: £22.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Details Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb MSRP: Now: £2.97 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender MSRP: Now: £3.72 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) MSRP: Now: £5.60 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover MSRP: Now: £2.22 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) MSRP: Now: £3.36 Add to Cart Compare Quick view Details CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch MSRP: Now: £3.75 Add to Cart Compare Quick view Details CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes MSRP: Now: £1.87 Add to Cart Compare Quick view Details CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip MSRP: Now: £22.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Details Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender MSRP: Now: £3.72 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) MSRP: Now: £5.60 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover MSRP: Now: £2.22 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) MSRP: Now: £3.36 Add to Cart Compare Quick view Details CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch MSRP: Now: £3.75 Add to Cart Compare Quick view Details CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes MSRP: Now: £1.87 Add to Cart Compare Quick view Details CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip MSRP: Now: £22.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Details Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) MSRP: Now: £5.60 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover MSRP: Now: £2.22 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) MSRP: Now: £3.36 Add to Cart Compare Quick view Details CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch MSRP: Now: £3.75 Add to Cart Compare Quick view Details CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes MSRP: Now: £1.87 Add to Cart Compare Quick view Details CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip MSRP: Now: £22.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Details Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover MSRP: Now: £2.22 Add to Cart Compare Quick view Details Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) MSRP: Now: £3.36 Add to Cart Compare Quick view Details CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch MSRP: Now: £3.75 Add to Cart Compare Quick view Details CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes MSRP: Now: £1.87 Add to Cart Compare Quick view Details CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip MSRP: Now: £22.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Details Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) MSRP: Now: £3.36 Add to Cart Compare Quick view Details CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch MSRP: Now: £3.75 Add to Cart Compare Quick view Details CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes MSRP: Now: £1.87 Add to Cart Compare Quick view Details CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip MSRP: Now: £22.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Details CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch MSRP: Now: £3.75 Add to Cart Compare Quick view Details CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes MSRP: Now: £1.87 Add to Cart Compare Quick view Details CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip MSRP: Now: £22.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Details CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes MSRP: Now: £1.87 Add to Cart Compare Quick view Details CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip MSRP: Now: £22.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Details CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip MSRP: Now: £22.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Cir-Kit Concepts | sku: CK1010-7 CK1010-7 - Screw Base Round Bulb One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts. Traditional round pea bulb that measures in which the screw base measures about 3/16" in diameter with a full length (from... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Cir-Kit Concepts | sku: CK1010-34 CK1010-34 - Candle Flame Socket The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,... MSRP: Now: £1.86 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Cir-Kit Concepts | sku: CK1010-29 CK1010-29 - Screw Base Candle Flame The one-inch scale dollhouse miniature CK1010-29 screw base candle flame bulb is widely used in chandeliers and sconces to achieve the candle-flame effect. Package includes four 12-volt bulbs by... MSRP: Now: £4.47 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Cir-Kit Concepts | sku: CK1010-17B CK1010-17B - 7/16" Candle Socket CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs... MSRP: Now: £2.62 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Cir-Kit Concepts | sku: CK1010-12 CK1010-12 - 12V Micro Flame Bulb The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are... MSRP: Now: £2.97 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Cir-Kit Concepts | sku: CK1007-1 CK1007-1 - Junction Splice Extender If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007)... MSRP: Now: £3.72 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Cir-Kit Concepts | sku: CK1004-3 CK1004-3 - Male Plugs (6 pack) Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps. Substitute for MH658. Use with pound-in receptacle (outlets) CK1003-1, MSRP: Now: £5.60 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Cir-Kit Concepts | sku: CK1003A CK1003A - Duplex Outlet Cover Give a polished brass look to all your one-inch (1:12) scale dollhouse miniature outlets. These bright and heavily engraved covers will provide a rich and finished appearance wherever they are used... MSRP: Now: £2.22 Add to Cart Compare Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view Cir-Kit Concepts | sku: CK1003 CK1003 - Duplex Wall Outlet (receptacle) To our knowledge, this is the smallest working outlet ever made, measuring a mere 13/32" high by 5/16" wide by 1/8" thick. The CK1003 outlet nails are embedded diagonally, allowing the outlet to be... MSRP: Now: £3.36 Add to Cart Compare Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK In addition to PayPal, we also accept American Express, Discover, Master Card and Visa. You will be able to use your credit card when you checkout. Simply click the CHECKOUT button from the cart to use these options.
Quick view CR2S | sku: CR2S908 CR2S908 - Snap On/Off Switch This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"... MSRP: Now: £3.75 Add to Cart Compare Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view CR2S | sku: CR2S907-2 CR2S907-2 - 1/16" Shrink Tubes Package of 100 pieces of 1-3/4" long 1/16" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect... MSRP: Now: £1.87 Add to Cart Compare Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected
Quick view CR2S | sku: CR2S701-2 CR2S701-2 - Junction Strip The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle... MSRP: Now: £22.47 Add to Cart Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected