US Dollars
Canadian Dollar
Euro
UK
Icelandic Króna
Russian Ruble
Swedish Krona
South African Rand
Product Description
A simple jack and connection block that replaces the junction splice.
- Simply press down the little red button, insert end of red connector wire (striped about 1/4" to expose silver wire) cut to a length to suit your needs into the corresponding hole then release the button.
- I suggest you test by pulling slightly on the wire to confirm that it is properly inserted into the chamber.
- Repeat with black button and black wire.
- If using tapewire, solder or use eyelets (grommets) to connect the wires to your tapewire.
- Insert corresponding plug from power source into the round receptor on the other end of the unit.
This power connector is designed for use with CR2S power supplies (sold separately).
You can also use this unit for a couple of lamps connected directly into the chambers.
