Shop All

CK800 - Brass Ceiling Canopy with Eyelet

The Cir-Kit Concepts' CK800 Ceiling Canopy makes any chandelier removable with just a "twist of the wrist". A quarter turn clockwise for installation and a quarter turn back for removal. Nothing could be simpler! And the rich plating will compliment even...

CK804-2 - Ceiling Fixture Adapter (11/16" diameter)

Thanks to Cir-Kit Concepts, ceiling fixtures can be made removable using the ceiling plate that is part of most chandelier designs.  The secret of these adapters lies in the use of specially designed spring-loaded eyelets. These eyelets firmly...

CK1010-17A - 7/16" Candle Socket w/Brown Wires

CK1010-17A is a 7/16" candle socket with 12" brown wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs such as CK1010-12, MH44013, or CR2S1010 or any of the other...

CK1100 - Dropping Resistor - 3 Pack

Package of three 680 ohm dropping resistors.    

CK1026 In-Line Fuseholder

The CK1026 in-line fuse-holder is used in conjunction with the CK1024 series of fuses for system protection. Easily assembled, the fuse-holder connects directly into the lead wire between the transformer and dollhouse. Complete instructions are included...

Brass Slide-Switch Plate Cover

Discontinued, clearance priced.  Decorative brass switch plate cover for sliding switches.  

CK1008-1 - Transformer Lead In Wire/Switch

CK1008-1 transformer lead-in wire with switch may be used for those installations requiring the convenience of total dollhouse on/off power control. (Eliminates need for unplugging lead-in wire from dollhouse to disconnect power.) Same in all other...

CK1049-3 Two-Pole Pound-In Terminal Block

The CK1049-3 allows for a quick and easy wire connection to any double conductor tape run. Simply place the protruding pins over the respective copper foils of the tapewire, pound in, and an electrical circuit is automatically made between the screw...

CK1011A - Brass Switch Plate Cover

CK1011A is the perfect way to add a finishing touch to all CK1011 one-inch (1:12) scale dollhouse miniature slide switches.  The ornate brass plate simply snaps over the switch providing a distinctive decorative appearance.  The "toggle" switch...

MG2316R - Beige Carpet

This 14-inch by 20-inch sheet of Beige colored one-inch (1:12) scale dollhouse miniature carpet by MiniGraphics is made in the USA of the finest plush material that has a special backing and will not fray when cut.  Dolls house carpeting may be cut...

Wedgewood Blue Carpet

This 14-inch by 20-inch sheet of Wedgwood Blue colored one-inch (1:12) scale dollhouse miniature carpet by MiniGraphics is made in the USA of the finest plush material that has a special backing and will not fray when cut.  Dolls house carpeting may...

MG2345R - Buff Color Carpet

This 14-inch by 20-inch sheet of buff-colored one-inch (1:12) scale dollhouse miniature carpet by MiniGraphics is made in the USA of the finest plush material that has a special backing and will not fray when cut.  Dolls house carpeting may be cut...