Electrical Components

CR2S710 - Grommets/Eyelets

These large grommets are gold plated to assure a good electrical connection, keep them from corroding, and allow for easy soldering. Package includes 110 grommets. They are the same size as those from Cir-Kit Concepts. These gold-plated large grommets...

CR2S728-2 - 50' Flat Tapewire

50-foot roll of flat tapewire with a heavy mylar coating. The tapewire has an adhesive backing that will adhere to most any surface. The two copper strips are colored black and copper for easy identification. The width of the tapewire is 5/8" with a...

CR2S728-1 - 30' Flat Tapewire

A 30-foot roll of flat tapewire with a heavy Mylar coating. The tapewire has an adhesive backing that will adhere to most any surface. The two copper strips are colored black and copper for easy identification. The width of the tapewire is 5/8" with a...

50' Black Hook-Up Wire

Rated for 6 amp use, this 50-goot spool of Kynar wire features silver plated solid copper round wire rated 28 AWG. Recommended for use with DC powered dollhouse wiring.

50' Red Hook-Up Wire

Rated for 6 amp use, this 50-foot spool of Kynar wire features silver plated solid copper round wire rated 28AWG. Recommended for use with DC power dollhouse wiring.

9V Tester w/Lead Clips

The perfect tester to keep in your dollhouse wiring toolbox. It is a simple unit using a 9-volt battery with two hooked clips. Great to see if the lamps and chandeliers you purchase really work before attempting to install them. Battery not included.

CR2S701-1C - Six Amp Power Connector

This simple junction or 6 amp power connector makes a solid electrical connection from the power supply plug to your dollhouse or display and has the added protective feature of a fast blow fuse. It comes with double stick tape on the back as well as a...

CR2S701-1B - Two Amp Power Connector

This simple junction or 2 amp power connector makes a solid electrical connection from the power supply plug to your dollhouse or display and has the added protective feature of a fast blow fuse. It comes with double stick tape on the back as well as a...

CR2S707-1 - One-amp DC Power Supply

This 1 amp DC (direct current) power supply features 12-volt, voltage regulated circuits. This power supply will work with all of the lights you presently use and/or have installed, but will give you the ability to add the new LEDs. All LEDs will work...

CR2S701-1A - One Amp Power Connector

This simple power (or junction) connector makes a solid electrical connection from the power supply (often referred to as the transformer) to your dollhouse or miniature display. It has the added protection feature of a fast blow fuse. The fuse should be...

MH44002 - Bi-Pin Sockets, 3/16 with 10" Leads

Package of four 3/16" bi-pin sockets, each with 10" leads by Miniature House is a working 12-volt miniature replacement bulbs for one-inch (1:12) scale dollhouses or roomboxes. Great for replacing non-working lamps and/or creating your own lighting...

MH40109 - Large Eyelets

Package of 20 large eyelets by Miniature House designed for use installing a 12-volt tapewire miniature electrical system in dollhouses or roomboxes.