Electrical Components

1/2 Amp Fuse

These fuses provide the high-speed action necessary to protect both transformer and lighting fixtures in the event of a short. They may be used as additional safety devices for new or existing Cir-Kit Concepts' wiring installations.A blown fuse is easily...

CK1021-1 - 1/8" Brass Brads

This 60-count package of 1/8" brass brads are some of the smallest in the world. When folded corners in a tape run are not desired these small, precisely made brads provide a very unobtrusive and effective means of establishing electrical connection...

CK1017A - Tapewire, 50' Roll

The double conductor tapewire is the "heart" of all Cir-Kit wiring systems. From its introduction in 1976 to the present it has been the predominant method of dollhouse wiring. Its use creates a printed circuit type layout and completely eliminates the...

CK1010-7D - Screw Base Light Bulbs

One-inch (1:12) scale miniature 12-volt screw-base round (pea) light bulbs in a package of four by Cir-Kit Concepts.

CK1010-7 - Screw Base Round Bulb

One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts.

CK1010-34 - Candle Flame Socket

The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb, CK1010-31 Grand Chandelier Candle-body Bulb, and CK1010-32...

CK1010-17B - 7/16" Candle Socket

CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs such as CK1010-12, MH44013, or CR2S1010 or any of the...

CK1010-12 - 12V Micro Flame Bulb

The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are perfect for chandeliers, sconces, candle-bodies or anywhere a...

CK1008-3 - Lead-in Wire w/switch

This lead-in wire from Cir-Kit Concepts provides connection from a screw terminal type transformer to terminal block such as CK1049-3 used for electrifying a dollhouse, roombox, or diorama. Both ends of CK1008-3 have spade lugs for connection between the...

CK1007-1 - Junction Splice Extender

If you wish to install your Junction Splice in a less conspicuous location, such as under the dollhouse, use this extender for easy electrical access. Simply plug it into the Junction splice (CK1007) and run the cord out for mating with the lead-in wire...

CK1004-3 - Male Plugs (6 pack)

Male plugs are packaged 6 per pack. Use these to create new lamps, rewire or replace old plugs on dollhouse lamps.  Substitute for MH658.  Use with pound-in receptacle (outlets) CK1003-1, MH776 or MH776X.   

CK1004 - Electrical Plug

The "to scale" CK1004 plug is made to work with the CK1003 outlet and may be attached to the bulb wires from any lighting fixture. To make an electrical connection, stripped lamp wires are simply inserted into small holes in the side of the plug and the...