Electrical Components

CK804-2 - Ceiling Fixture Adapter (11/16" diameter)

Thanks to Cir-Kit Concepts, ceiling fixtures can be made removable using the ceiling plate that is part of most chandelier designs.  The secret of these adapters lies in the use of specially designed spring-loaded eyelets. These eyelets firmly...

CK1010-17A - 7/16" Candle Socket w/Brown Wires

CK1010-17A is a 7/16" candle socket with 12" brown wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs such as CK1010-12, MH44013, or CR2S1010 or any of the other...

CK1100 - Dropping Resistor - 3 Pack

Package of three 680 ohm dropping resistors.    

CK1026 In-Line Fuseholder

The CK1026 in-line fuse-holder is used in conjunction with the CK1024 series of fuses for system protection. Easily assembled, the fuse-holder connects directly into the lead wire between the transformer and dollhouse. Complete instructions are included...

Brass Slide-Switch Plate Cover

Discontinued, clearance priced.  Decorative brass switch plate cover for sliding switches.  

CK1008-1 - Transformer Lead In Wire/Switch

CK1008-1 transformer lead-in wire with switch may be used for those installations requiring the convenience of total dollhouse on/off power control. (Eliminates need for unplugging lead-in wire from dollhouse to disconnect power.) Same in all other...

CK1049-3 Two-Pole Pound-In Terminal Block

The CK1049-3 allows for a quick and easy wire connection to any double conductor tape run. Simply place the protruding pins over the respective copper foils of the tapewire, pound in, and an electrical circuit is automatically made between the screw...

CK1049 - Two Pole Terminal Block

CK1049 is a heavy-duty terminal block for interconnecting wires of all sizes.  Electrical connection exists between opposite screw terminals and one or more wires may be attached to each screw terminal.  This two-pole terminal block is 1-1/2"...

MH658 - Male Plug, 6/Pack

Whether you are creating your own miniature lamps or lights for your one-inch (1:12) scale dollhouse or just need to replace an old standard plug, MH658 from Miniature House is just what you are looking for!  White plastic and brass.  Designed...

MH44006 - Heavy Duty Junction Splice

The MH44006 junction splice from Miniature House serves to connect the lead-in wires from the transformer to the tapewire.  The embedded nails/pins, in addition to holding the connector in place, also carry the current from the transformer to the...

CK806-1 - Plug-in Ceiling Plate

CK806-1 is a black ceiling plate adapter that allows any light to be mounted on the same surface as the tape run and become a truly "plug-in" fixture.2 Special spring-loaded eyelets (CK1023-6) are included with each adapter. These eyelets grip the...

CK804-3 - Ceiling Fixture Adapter (27/32" diameter)

Thanks to Cir-Kit Concepts, chandeliers and other ceiling fixtures can be made removable using the ceiling plate that is part of most chandelier designs.  The secret of these adapters lies in the use of specially designed spring-loaded eyelets...