Electrical Components

Brass Slide-Switch Plate Cover

Discontinued, clearance priced.  Decorative brass switch plate cover for sliding switches.  

CK1008-1 - Transformer Lead In Wire/Switch

CK1008-1 transformer lead-in wire with switch may be used for those installations requiring the convenience of total dollhouse on/off power control. (Eliminates need for unplugging lead-in wire from dollhouse to disconnect power.) Same in all other...

CK1049-3 Two-Pole Pound-In Terminal Block

The CK1049-3 allows for a quick and easy wire connection to any double conductor tape run. Simply place the protruding pins over the respective copper foils of the tapewire, pound in, and an electrical circuit is automatically made between the screw...

CK1016 - Voltage Regulator

Type a description for this product here...

MH658 - Male Plug, 6/Pack

Whether you are creating your own miniature lamps or lights for your one-inch (1:12) scale dollhouse or just need to replace an old standard plug, MH658 from Miniature House is just what you are looking for!  White plastic and brass.  Designed...

CK806-1 - Plug-in Ceiling Plate

CK806-1 is a black ceiling plate adapter that allows any light to be mounted on the same surface as the tape run and become a truly "plug-in" fixture.2 Special spring-loaded eyelets (CK1023-6) are included with each adapter. These eyelets grip the...

CK804-3 - Ceiling Fixture Adapter (27/32" diameter)

Thanks to Cir-Kit Concepts, chandeliers and other ceiling fixtures can be made removable using the ceiling plate that is part of most chandelier designs.  The secret of these adapters lies in the use of specially designed spring-loaded eyelets...

CK801 - Round Sconce Adapter

With the CK801 round sconce adapter by Cir-Kit Concepts, a sconce may be installed on either a vertical or horizontal tape run and may be rotated up to 30 degrees in either direction for perfect vertical alignment. The adapter ring is fully brass plated...

CK2103 - Screw Base Sockets

Package of screw base sockets with candle bulb by Cir-Concepts. Great for designing and creating your own 1:12 scale dollhouse miniature lamps and lighting fixtures.  These screw base sockets are designed for use with a 12-volt system and accepts...

CK1033-4 - Black Heat Shrink Tubes

Use these larger heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to 1/2 the original size when heated. Rated wire size and applications are:CK1033-4 (1/16" inside diameter) 24...

CK1033-3 - Clear Heat Shrink Tubes

The CK1033 and CK1033-3 heat shrink tubes are some of the smallest made, both in diameter and wall thickness. The inside diameter is .040" or just slightly larger than the insulation on a GOW bulb wire. The wall thickness is approximately .002" (the...

Ck1033-1 - Solder Spool

Four-foot length of 60/40 rosin core solder with a diameter of .050" by Cir-kit Concepts in a convenient storage container. WARNING: For hobby use only. Contains lead which may be harmful to health. Wash hands after use. Use adequate ventilation. DANGER:...