US Dollars
Canadian Dollar
Euro
UK
Icelandic Króna
Russian Ruble
Swedish Krona
South African Rand
Product Description
This is a flickering LED that replaces the standard screw base candlestick bulb. Now you can make any wall sconce or candlelight that comes with the miniature screw base candle body incandescent bulb with a new flickering LED to make it look like a real flame. Each flickering LED works independently of each other and thus flickers differently than any other LED. Perfect for putting a candlelight in each window of your dollhouse...and each will flicker differently with no need for extra wires or complicated wiring. These flickering LEDs will not affect the lights in the rest of the dollhouse and are rated for a 60,000-hour lifespan. As with all LED bulbs, they work only with a DC current. Sold as a package of 2 candlestick bulbs.
- CR2S522-4
- Flickering LED
- low intensity
- 5ma
- replacement bulb
- screw base
- candlestick (candle body)
- 60,000-hour life span
- 12-volt DC current only
- 2 bulbs per package
- replacement option for CK1010-31 and HW2815
- flame tip
These LEDs work only on 12 volts DC and thus have a polarity that must be met. The threaded side of the base is the negative contact, and the bottom tip is the positive contact. For a new lamp being put into your dollhouse you can simply replace all of the incandescent bulbs with one of the new LEDs. When you connect it to the dollhouse 12-volt DC circuit you may need to reverse the two leads in order for the light to work. If the lamp has a plug, simply reverse the direction you are plugging it into the wall outlet and the lamp will work. For light fixtures already hardwired into your dollhouse, you have a 50/50 chance that when you replace the bulb it will simply work. If not, you might try flipping the two wires connected to the DC power source.
