US Dollars
Canadian Dollar
Euro
UK
Icelandic Króna
Russian Ruble
Swedish Krona
South African Rand
Product Description
Now you can replace your old screw base candlestick bulbs with a 50,000-hour warm white LEDs. These replacement bulbs are now available in a lower brightness level closer to that of the original incandescent bulb and in both pure white (CR2S522-1) and warm white (CR2S522-2) at 12 volts DC. Each new LED bulb is specially made to illuminate a full 360 degrees looking very similar to the bulb it is replacing. These LEDs work only on 12 volts DC and thus have a polarity that has to be met. The threaded sides of the base are the negative contact, and the bottom tip is your positive contact. For a new lamp being put into your dollhouse you can simply replace all of the incandescent bulbs with one of the new LEDs. When you connect it to the dollhouse 12-volt DC circuit you may need to reverse the two leads in order for the light to work. If the lamp has a plug, simply reverse the direction you are plugging it into the wall outlet and the lamp will work. For light fixtures already hardwired into your dollhouse, you have a 50/50 chance that when you replace the bulb it will simply work. If not, you might try flipping the two wires connected to the DC power source. Packaged 6 bulbs per pack.
- CR2S522-2
- 50,000-hour rating
- low intensity
- warm white
- 5ma
- 6 bulbs per package
- 12-volt DC
- screw base
- replacement for CK1010-31 and HW2815
- LED replacement bulb
- candlestick (candle body)
- flame tip
