Now you can replace your old screw base bulbs with a 50,000-hour LED. These replacement bulbs are a lower brightness level closer to that of the original incandescent bulb and in pure white at 12 volts DC. Each new LED bulb is specially made to illuminate a full 360 degrees looking very similar to the bulb it is replacing. Please NOTE that these LEDs work only on 12 volts DC and thus have a polarity that has to be met. The threaded sides of the base are the negative contact and the bottom tip is your positive contact. For a new lamp being put into your dollhouse you can simply replace all of the incandescent bulbs with one of the new LEDs. When you connect it to the dollhouse 12 volt DC circuit you may need to reverse the two leads in order for the light to work. If the lamp has a plug, simply reverse the direction you are plugging it into the wall outlet and the lamp will work. For light fixtures already hardwired into your dollhouse, you have a 50/50 chance that when you replace the bulb it will simply work. If not, you might try flipping the two wires connected to the DC power source. Four bulbs per package (30 ma each)
- LED replacement bulb
- screw base
- pea (round) bulb style
- rated for 50,000 hours
- requires DC power
- 12 volt
- 4 bulbs per package
- pure white
- replacement for CK1010-7D, MH621, HW2214
2 Reviews Hide Reviews Show Reviews
This bulb really made a difference in the light in my dollhouse. the rooms look much brighter.
This light I brought to replace my old screw type bulbs because they put out more brighter light in a room.You will be pleased with the light affect you get!