Product Description
Now you can replace your old screw base miniature bulbs with a 50,000-hour LED. Each new LED bulb is specifically made to illuminate a full 360 degrees making it look very similar to the bulb it is designed to replace. These LEDs work only on 12-volt DC and thus have a polarity that has to be met. The threaded sides of the base are the negative contact, and the bottom tip is your positive contact. For a new lamp being put into your dollhouse you can simply replace all of the incandescent bulbs with one of the new LEDs. When you connect it to the dollhouse 12-volt DC circuit you made need to reverse the the leads in order for the light to work. If the lamp has a plug, simply reverse the direction you are plugging it into the wall outlet and the lamp will work. For light fixtures already hardwired into your dollhouse, you have a 50/50 chance that when you replace the bulb it will simply work. If not, you might try flipping the two wires connected to the DC power source. Sold as a package of six bulbs, each rated for 50,000 hours and 5ma. CR2S520-2 is a warm white low intensity screw base replacement LED bulb.
- CR2S520-2
- LED Replacement Bulb
- rated for 50,000 hours
- 5ma
- screw-base
- flame tip
- 12-volt
- DC current
- 6 per package
- warm white
- low intensity
- LED replacement option for CK1010-29, MH44035, MH763 (frosted) and HW2101