CR2S

CR2S714 - Nine-Volt Battery Pack

Empty battery box made for the 9-volt battery. Box has an on/off slide switch and two 6-inch wire leads.  Connect wires for lights using shrink tubes.  

CR2S728-1 - 30' Flat Tapewire

A 30-foot roll of flat tapewire with a heavy Mylar coating. The tapewire has an adhesive backing that will adhere to most any surface. The two copper strips are colored black and copper for easy...

CR2S728-2 - 50' Flat Tapewire

50-foot roll of flat tapewire with a heavy mylar coating. The tapewire has an adhesive backing that will adhere to most any surface. The two copper strips are colored black and copper for easy...

CR2S729-2 - Subminiature Pin Connectors

Package of 4 small pin connectors with 8", 28 AWG Kynar wire leads on each end.  It is the perfect way to easily connect and disconnect a light or display module you wish to remove...

CR2S907-2 - 1/16" Shrink Tubes

Package of 100 pieces of 1-3/4" long 1/16" shrink tube.  Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections.  Acts as an insulation jacket to...

CR2S908 - Snap On/Off Switch

This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16"...

Landscape Spot Light

This new 12 volt LED landscape spot light features a blackish bronze, swivel base fixture that is perfect for illuminating trees or the front of your dollhouse. This particular unit works only with a...

Micro Jacks w/Tails

Micro jacks make it possible to plug and unplug your light fixtures in the wiring system of your dollhouse when used in conjunction with Cir-Kit's sconce adapters (CK801), chandelier adapters (CK804...

Plastic Layout Gauge

The plastic layout gauge is a quick way to mark and run tapewire. Simply use a pencil at one of the corners of the gauge and slide the gauge along the floor of the dollhouse making a line on the wall...

Pure White Can Lights

This light is the most realistic and best proportioned can light on the market. It uses a flat top pure white 5mm LED color. It is extremely easy to install. Simply drill a 5/16th inch hole in the...

Round Globe Landscape

Miniature solid brass replaceable bi-pin lamp and globe. The total height is only 1.5 inches and each globe is 5/16" diameter. These lights were designed for one-inch (1:12) scale dollhouse miniature...

Three-Foot Extension Cord

This three-foot cable extends the distance from your power supply to the dollhouse.  The plug and jack each measure about 5.5mm x 2.1mm. The wire cable has been upgraded to 18 awg...