Cir-Kit Concepts

Ck1033-1 - Solder Spool

Four-foot length of 60/40 rosin core solder with a diameter of .050" by Cir-kit Concepts in a convenient storage container. WARNING: For hobby use only. Contains lead which may be harmful to health...

CK1033-3 - Clear Heat Shrink Tubes

The CK1033 and CK1033-3 heat shrink tubes are some of the smallest made, both in diameter and wall thickness. The inside diameter is .040" or just slightly larger than the insulation on a GOW...

CK1033-4 - Black Heat Shrink Tubes

Use these larger heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to 1/2 the original size when heated. Rated wire size and...

CK1033-5 - Black Heat Shrink Tubes

Use these larger, heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to about 1/2 the original size when heated. Rated wire size...

CK1033-6 - Black Heat Shrink Tubes

Use these larger, heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to about 1/2 the original size when heated. Rated wire size...

CK1049-3 Two-Pole Pound-In Terminal Block

The CK1049-3 allows for a quick and easy wire connection to any double conductor tape run. Simply place the protruding pins over the respective copper foils of the tapewire, pound in, and an...

CK1100 - Dropping Resistor - 3 Pack

Package of three 680 ohm dropping resistors.    

CK2103 - Screw Base Sockets

Package of screw base sockets with candle bulb by Cir-Concepts. Great for designing and creating your own 1:12 scale dollhouse miniature lamps and lighting fixtures.  These screw base sockets...

CK4003 - Tulip Shade Sconce

CK4003 is a one-inch (1:12) scale dollhouse miniature brass and white plastic tulip shade wall sconce that measures 7/8" high with a 1/2" diameter back-plate This lighting fixture uses a replaceable...

CK4158 - Black Gothic Coach Lamp

The ornate, gothic, coach lamp from Cir-Kit Concepts features a black finish and measures about 2-5/16" high with a back-plate diameter of 9/16".  The working, 12-volt, light is equipped with...

CK512 - Plug-In Light

The CK512 light fixture provides an easy method of installing an authentic-looking incandescent ceiling light. Using Cir-Kit Concepts unique eyelet and plug combination, this light may be plugged...

CK800 - Brass Ceiling Canopy with Eyelet

The Cir-Kit Concepts' CK800 Ceiling Canopy makes any chandelier removable with just a "twist of the wrist". A quarter turn clockwise for installation and a quarter turn back for removal. Nothing...