Shop All

CR2S610-1 - 1" x 1/8" LED Ribbons (WW)

One of the easiest ways to install LEDs to your dollhouse or miniature room setting. Each package contains six pieces of 1" long by 1/8" wide ribbon. Each piece has two warm white LEDs, six-inch leads soldered to one end, and double stick tape on the...

Battery Holder w/Wire Lead Plug

This plastic battery box holds eight AA batteries providing a total output of 12 volts.  It is an excellent power source for those small displays needing 12 volts of power for light.  A temporary source for testing when you do not have a...

CR2S003 - Large Wiring Kit

Creative Reproduction 2 Scale's Large Wiring Kit includes everything you need to wire a dollhouse, diorama, or roombox with direct current (DC) power that allows you to electrify your project using any standard dollhouse miniature fixtures as well as...

CR2S001 - Basic Wiring Kit

Creative Reproduction 2 Scale's Basic Wiring Kit includes everything you need to wire a dollhouse, diorama, or roombox with direct current (DC) power which will allow you to electrify your project using any standard dollhouse miniature lamps as well as...

CR2S908 - Snap On/Off Switch

This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16" high. The center button is just 3/16" in diameter.

5 Meter LED Reel (CW)

These cool white LEDs on a reel are the least expensive way to purchase a length of lights. The approximately 1/4" wide ribbon has an adhesive backing making it very easy to install. These LEDs work with DC current only, so you will need to use a...

CR2S907-2 - 1/16" Shrink Tubes

Package of 100 pieces of 1-3/4" long 1/16" shrink tube.  Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections.  Acts as an insulation jacket to protect two bare wires from shorting out.

3/32" Shrink Tubes

Ten 1-3/4" long pieces of 3/32" shrink tube. Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections. Acts as an insulation jacket to protect two bare wires from shorting out.

Kynar Twisted Wire

Kynar wrapped wire is a high quality wire. This product is different than most hook-up wire and because of its composition it is rated to carry a much higher current. The Kynar coating is more durable and able to withstand higher temperatures without...

CR2S701-2 - Junction Strip

The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle switch and a set of 12 connection blocks to wire...

CR2S700 - BamBam

The spring tool, BamBam, simplifies the insertion of large grommets for dollhouse wiring! This tool eliminates the need for small brads or small grommets for tapewire connections. BamBam has a center punch on one end and a pin of the other designed to...

CR2S522-3 - Screwbase LED Candlesticks

Package of six pure white low intensity candlestick (candle body) replacement LED bulbs, each providing 50,000 hours 5 ma lighting.  Each new LED bulb is specially made to illuminate a full 360 degrees, looking very similar to the bulb it is...