Shop All

CK1044-1 - Pins/Awl Replacement

Designed for use with Cir-Kit Concepts' CK1044 awl, CK1044-1 is a four pack of awl replacement pins that will store conveniently in the hollow compartment in the metal shank of the tool.

CK1033-4 - Black Heat Shrink Tubes

Use these larger heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to 1/2 the original size when heated. Rated wire size and applications are:CK1033-4 (1/16" inside diameter) 24...

CK1033-3 - Clear Heat Shrink Tubes

The CK1033 and CK1033-3 heat shrink tubes are some of the smallest made, both in diameter and wall thickness. The inside diameter is .040" or just slightly larger than the insulation on a GOW bulb wire. The wall thickness is approximately .002" (the...

Ck1033-1 - Solder Spool

Four-foot length of 60/40 rosin core solder with a diameter of .050" by Cir-kit Concepts in a convenient storage container. WARNING: For hobby use only. Contains lead which may be harmful to health. Wash hands after use. Use adequate ventilation. DANGER:...

CK1033 - Green Heat Shrink Tubes

These small shrink tubes provide an excellent means of connecting 32-gauge wires such as GOW bulb wires together without the use of solder. The shrink tube is simply slid over one of the wires to be joined, the barred wires twisted together, and the...

CK1028-6 - Four-Pack Single Receptacles

CK1028-6 includes four single receptacle extension cords.  Each single unit receptacle features an approximate 8" length of white wire with plug allowing you to extend or hardwire an outlet into your tapewire system.  

1/2 Amp Fuse

These fuses provide the high-speed action necessary to protect both transformer and lighting fixtures in the event of a short. They may be used as additional safety devices for new or existing Cir-Kit Concepts' wiring installations.A blown fuse is easily...

CK1021-1 - 1/8" Brass Brads

This 60-count package of 1/8" brass brads are some of the smallest in the world. When folded corners in a tape run are not desired these small, precisely made brads provide a very unobtrusive and effective means of establishing electrical connection...

CK1017A - Tapewire, 50' Roll

The double conductor tapewire is the "heart" of all Cir-Kit wiring systems. From its introduction in 1976 to the present it has been the predominant method of dollhouse wiring. Its use creates a printed circuit type layout and completely eliminates the...

CK1010-7 - Screw Base Round Bulb

One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts.

CK1010-17B - 7/16" Candle Socket

CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs such as CK1010-12, MH44013, or CR2S1010 or any of the...

CK1010-17 - 7/16" Candle Socket, White Wire

CK1010-17 is a 7/16" candle socket with 12" white wire that easily accommodates a flame tip bi-pin bulb. Create your own chandeliers or use these candle sockets to create a candle in your dollhouse windows. Just remember, you will need to drill holes...