Shop All

Countryside Blue Wallpaper

Countryside Blue wallpaper by Mini Graphics is made in the USA. Each sheet is approximately 17-3/4 inches by 12 inches. Wallpaper paste (sold separately) is required for this one-inch scale dollhouse wallpaper. We recommend 2 to 3 sheets of wallpaper for...

MG108D93 - Mini Moire Grey Wallpaper

Mini Moire Grey wallpaper by Mini Graphics is made in the USA. Each sheet is approximately 17-3/4" wide by 12" tall. Wallpaper paste (sold separately) is required for this one-inch scale (1:12) dollhouse wallpaper. We recommend 2 to 3 sheets of wallpaper...

CR2S521-1 - Screw Base LED Pea Bulb

Now you can replace your old screw base bulbs with a 50,000-hour LED.  These replacement bulbs are a lower brightness level closer to that of the original incandescent bulb and in pure white at 12 volts DC.  Each new LED bulb is specially made...

CK842 - 12V Small Pin-in Ceiling Globe

The small pin-in ceiling globe is one of the easiest to install ceiling lights yet! Nails embedded in the globes allow pounding of the fixture directly into a tape run with no additional wiring or electrical connections. Apply power and, presto, you have...

CK806-1 - Plug-in Ceiling Plate

CK806-1 is a black ceiling plate adapter that allows any light to be mounted on the same surface as the tape run and become a truly "plug-in" fixture.2 Special spring-loaded eyelets (CK1023-6) are included with each adapter. These eyelets grip the...

CK804-3 - Ceiling Fixture Adapter (27/32" diameter)

Thanks to Cir-Kit Concepts, chandeliers and other ceiling fixtures can be made removable using the ceiling plate that is part of most chandelier designs.  The secret of these adapters lies in the use of specially designed spring-loaded eyelets...

CK801 - Round Sconce Adapter

With the CK801 round sconce adapter by Cir-Kit Concepts, a sconce may be installed on either a vertical or horizontal tape run and may be rotated up to 30 degrees in either direction for perfect vertical alignment. The adapter ring is fully brass plated...

CK512 - Plug-In Light

The CK512 light fixture provides an easy method of installing an authentic-looking incandescent ceiling light. Using Cir-Kit Concepts unique eyelet and plug combination, this light may be plugged into a tape run wherever a bare bulb look is desired...

CK4003 - Tulip Shade Sconce

CK4003 is a one-inch (1:12) scale dollhouse miniature brass and white plastic tulip shade wall sconce that measures 7/8" high with a 1/2" diameter back-plate This lighting fixture uses a replaceable bulb CK1010-29 and is compatible with optional CK801...

CK2103 - Screw Base Sockets

Package of screw base sockets with candle bulb by Cir-Concepts. Great for designing and creating your own 1:12 scale dollhouse miniature lamps and lighting fixtures.  These screw base sockets are designed for use with a 12-volt system and accepts...

CK1044-1 - Pins/Awl Replacement

Designed for use with Cir-Kit Concepts' CK1044 awl, CK1044-1 is a four pack of awl replacement pins that will store conveniently in the hollow compartment in the metal shank of the tool.

CK1033-4 - Black Heat Shrink Tubes

Use these larger heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to 1/2 the original size when heated. Rated wire size and applications are:CK1033-4 (1/16" inside diameter) 24...