One Inch (1:12) Scale

1 to 2 Splitter

This electrical component is just what you need to easily run two displays from one power supply. Simply connect the single end to the output plug of the power supply then connect each of the two other cords into the separate plugs on each of the...

CR2S705-2 - Micro Jack (no tail)

Micro jacks make it possible to plug and unplug your light fixtures in the wiring system of your dollhouse when used in conjunction with Cir-Kit's sconce adapters (CK801), chandelier adapters (CK804 series), and plug-in ceiling plate (CK806).  These...

Micro Jacks w/Tails

Micro jacks make it possible to plug and unplug your light fixtures in the wiring system of your dollhouse when used in conjunction with Cir-Kit's sconce adapters (CK801), chandelier adapters (CK804 series), and plug-in ceiling plate (CK806). These micro...

CR2S701-0 - Mini Power Connector

A simple jack and connection block that replaces the junction splice. Simply press down the little red button, insert end of red connector wire (striped about 1/4" to expose silver wire) cut to a length to suit your needs into the corresponding hole...

12 Volt Battery Pack

This empty plastic battery box measures 2.24 x 2.43 x 1.14 inches (56.9 x 61.8 x 29 mm).  Holds eight AA batteries giving an output of 12 volts.  An excellent power source for those small displays needing 12 volts to light them up.  A...

CR2S714 - Nine-Volt Battery Pack

Empty battery box made for the 9-volt battery. Box has an on/off slide switch and two 6-inch wire leads.  Connect wires for lights using shrink tubes.  

CR2S710 - Grommets/Eyelets

These large grommets are gold plated to assure a good electrical connection, keep them from corroding, and allow for easy soldering. Package includes 110 grommets. They are the same size as those from Cir-Kit Concepts. These gold-plated large grommets...

CR2S403 - Round Globe Lamp Post

This landscape lamp, black, iron-look post is a full 6" tall and was designed to coordinate with the globe style small landscape lights from CR2S. This lamp features a replaceable, 12-volt, screw base, flame tip LED high-intensity bulb.

Warm Light Can Lights

This light is the most realistic and best proportioned can light on the market. It uses a flat top warm white 5mm LED color. It is extremely easy to install. Simply drill a 5/16th inch hole in the ceiling or top of a cabinet and insert the can light...

Pure White Can Lights

This light is the most realistic and best proportioned can light on the market. It uses a flat top pure white 5mm LED color. It is extremely easy to install. Simply drill a 5/16th inch hole in the ceiling or top of a cabinet and insert the can light...

CR2S728-2 - 50' Flat Tapewire

50-foot roll of flat tapewire with a heavy mylar coating. The tapewire has an adhesive backing that will adhere to most any surface. The two copper strips are colored black and copper for easy identification. The width of the tapewire is 5/8" with a...

CR2S728-1 - 30' Flat Tapewire

A 30-foot roll of flat tapewire with a heavy Mylar coating. The tapewire has an adhesive backing that will adhere to most any surface. The two copper strips are colored black and copper for easy identification. The width of the tapewire is 5/8" with a...