One Inch (1:12) Scale

Oriental Rug Pattern

An Oriental rug may be defined as a hand-made rug produced by traditional methods of weaving in countries occupying territory along the ancient silk route to the East. this particular design is typical of the Ming rugs. A Chinese lattice forms the...

Folk Art Patterns

The simplicity and charm of the more primitive rugs of the Early American home are classified as folk art because the personality and individuality of each make comes through in color choices and modifications of designs. When the burlap bags used for...

CR2S610-3 - 6" x 1/8" LED Ribbons (WW)

One of the easiest ways to install LEDs in your dollhouse or roombox miniature setting. Each package contains two pieces of 6" long by 1/8" wide ribbon. Each ribbon has 12 warm white LEDs, six-inch leads soldered to one end, and double stick tape on the...

CR2S610-2 - LED Ribbons (WW) 2" x 1/8"

One of the easiest ways to install LEDs in your dollhouse or roombox miniature setting. Each package contains four pieces of 2" long by 1/8" wide ribbon. Each ribbon has four warm white LEDs, six-inch leads soldered to one end, and double stick tape on...

2" x 1/8" LED Ribbons (PW)

One of the easiest ways to install LEDs in your dollhouse or roombox miniature settings. Each package contains four pieces of 2" long by 1/8" wide ribbon. Each ribbon has four pure white LEDs, six-inch leads soldered to one end, and double stick tape on...

1" x 1/8" LED Ribbons (PW)

One of the easiest ways to install LEDs in your dollhouse or roombox miniature setting. Each package contains six pieces of 1" long by 1/8" wide ribbon. Each ribbon has two pure white LEDs, six-inch leads soldered to one end, and double stick tape on the...

CR2S610-1 - 1" x 1/8" LED Ribbons (WW)

One of the easiest ways to install LEDs to your dollhouse or miniature room setting. Each package contains six pieces of 1" long by 1/8" wide ribbon. Each piece has two warm white LEDs, six-inch leads soldered to one end, and double stick tape on the...

CR2S908 - Snap On/Off Switch

This white snap on/off switch can be easily glued in place and is able to carry up to 1.5 amps of current. An excellent switch for working with LEDs. The overall size is just 1/2" by 5/16" and 5/16" high. The center button is just 3/16" in diameter.

5 Meter LED Reel (CW)

These cool white LEDs on a reel are the least expensive way to purchase a length of lights. The approximately 1/4" wide ribbon has an adhesive backing making it very easy to install. These LEDs work with DC current only, so you will need to use a...

CR2S907-2 - 1/16" Shrink Tubes

Package of 100 pieces of 1-3/4" long 1/16" shrink tube.  Tube can be heated with a match or a hair dryer to shrink it over bare wire junctions/connections.  Acts as an insulation jacket to protect two bare wires from shorting out.

CR2S701-2 - Junction Strip

The junction strip is the second connector for people that prefer to use roundwire for dollhouse wiring. This unit has the same jack for the power supply plug and a fuse, but also an on/off toggle switch and a set of 12 connection blocks to wire...

CR2S700 - BamBam

The spring tool, BamBam, simplifies the insertion of large grommets for dollhouse wiring! This tool eliminates the need for small brads or small grommets for tapewire connections. BamBam has a center punch on one end and a pin of the other designed to...