One Inch (1:12) Scale

CK2103 - Screw Base Sockets

Package of screw base sockets with candle bulb by Cir-Concepts. Great for designing and creating your own 1:12 scale dollhouse miniature lamps and lighting fixtures.  These screw base sockets are designed for use with a 12-volt system and accepts...

CK1044-1 - Pins/Awl Replacement

Designed for use with Cir-Kit Concepts' CK1044 awl, CK1044-1 is a four pack of awl replacement pins that will store conveniently in the hollow compartment in the metal shank of the tool.

CK1033-4 - Black Heat Shrink Tubes

Use these larger heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to 1/2 the original size when heated. Rated wire size and applications are:CK1033-4 (1/16" inside diameter) 24...

CK1033-3 - Clear Heat Shrink Tubes

The CK1033 and CK1033-3 heat shrink tubes are some of the smallest made, both in diameter and wall thickness. The inside diameter is .040" or just slightly larger than the insulation on a GOW bulb wire. The wall thickness is approximately .002" (the...

Ck1033-1 - Solder Spool

Four-foot length of 60/40 rosin core solder with a diameter of .050" by Cir-kit Concepts in a convenient storage container. WARNING: For hobby use only. Contains lead which may be harmful to health. Wash hands after use. Use adequate ventilation. DANGER:...

CK1033 - Green Heat Shrink Tubes

These small shrink tubes provide an excellent means of connecting 32-gauge wires such as GOW bulb wires together without the use of solder. The shrink tube is simply slid over one of the wires to be joined, the barred wires twisted together, and the...

CK1028-6 - Four-Pack Single Receptacles

CK1028-6 includes four single receptacle extension cords.  Each single unit receptacle features an approximate 8" length of white wire with plug allowing you to extend or hardwire an outlet into your tapewire system.  

CK1028-5 - Bridging Cord

Cir-Kit Concepts' adapter cords have been developed primarily for those instances where running power by wire may be more convenient than running it with tape; for example, where two miniature rooms are to be electrically connected together and work from...

1/2 Amp Fuse

These fuses provide the high-speed action necessary to protect both transformer and lighting fixtures in the event of a short. They may be used as additional safety devices for new or existing Cir-Kit Concepts' wiring installations.A blown fuse is easily...

CK1021-1 - 1/8" Brass Brads

This 60-count package of 1/8" brass brads are some of the smallest in the world. When folded corners in a tape run are not desired these small, precisely made brads provide a very unobtrusive and effective means of establishing electrical connection...

CK1017A - Tapewire, 50' Roll

The double conductor tapewire is the "heart" of all Cir-Kit wiring systems. From its introduction in 1976 to the present it has been the predominant method of dollhouse wiring. Its use creates a printed circuit type layout and completely eliminates the...

CK1010-7 - Screw Base Round Bulb

One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts.