Cir-Kit Concepts

CK1010-12 - 12V Micro Flame Bulb

The CK1010-12 Micro Flame Bulb with 1" wire terminals are among the smallest bulbs to be found anywhere. Measuring a mere .079" (2mm), these one-inch (1:12) scale dollhouse miniature bulbs are...

CK1010-16 - 3/16" Candle Socket

CK1010-16 is a 3/16" candle socket with 12" white wire that easily accommodates a bi-pin bulb. Create your own chandeliers or use these candle sockets to create a candle in your dollhouse windows...

CK1010-17A - 7/16" Candle Socket w/Brown Wires

CK1010-17A is a 7/16" candle socket with 12" brown wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs such...

CK1010-17B - 7/16" Candle Socket

CK1010-17B is a 7/16" candle socket with 12" varnished wires by Cir-Kit Concepts, Inc. This candle socket is great for replacing non-electrified light fixtures or creating your own. Use bi-pin bulbs...

CK1010-34 - Candle Flame Socket

The CK1010-34 candle-flame socket from Cir-Kit Concepts allows construction of chandeliers or lamps of your own design. This socket is compatible with replaceable CK1010-29 Candle-flame Bulb,...

CK1010-5 - 12V Wire Terminal Bulb

The CK1010-5 bulb is designed for special applications where regular GOW and GOR type bulbs may not be suitable. This bulb allows a practical and most cost effective means of providing light in a...

CK1010-7 - Screw Base Round Bulb

One round (pea), screw-base, 12-volt, replacement bulb by Cir-Kit Concepts.

CK1010-7D - Screw Base Light Bulbs

One-inch (1:12) scale miniature 12-volt screw-base round (pea) light bulbs in a package of four by Cir-Kit Concepts.

CK1011 - Miniature Slide Switch

The "to scale" CK1011 miniature slide switch is the first of its kind ever made in the electronics industry. Most standard models are equipped with a protruding toggle to allow electrical operation...

CK1011A - Brass Switch Plate Cover

CK1011A is the perfect way to add a finishing touch to all CK1011 one-inch (1:12) scale dollhouse miniature slide switches.  The ornate brass plate simply snaps over the switch providing a...

CK1014-1 Pilot Hole Punch (w/2 needles)

An essential tape wiring installation tool, the Pilot Hole Punch provides a convenient method of making starter holes for brass brads at all electrical interconnection points. The diameter of the...

CK1015 - Tapewire Instruction Book

The tapewire instruction book by Cir-Kit Concepts Inc. is a great introduction to the tapewire system as well as a handy reference book for trouble-shooting and advanced concepts. Your dollhouse...