Product Description
This set of four replacement bi-pin bulbs with standard round tip by Miniature House is for 12-volt dollhouse miniature electrical fixtures. Bulbs arrive with approximately 3/4" wire which must be cut to suit your needs. Generally, the wires should be trimmed to about 1/4" to 1/8" lengths to fit into the bi-pin sockets. We recommend you start with the longer length then shorten as needed. If too much length is left on the leads, you run the risk of twisting and shorting out the bulb. We also suggest you cut the wires on a slight angle so that one wire is 1/32" to 1/16" longer than the other. This makes insertion a little easier.