CK1008-1 - Transformer Lead In Wire/Switch

CK1008-1 transformer lead-in wire with switch may be used for those installations requiring the convenience of total dollhouse on/off power control. (Eliminates need for unplugging lead-in wire from dollhouse to disconnect power.) Same in all other...

CK1049-3 Two-Pole Pound-In Terminal Block

The CK1049-3 allows for a quick and easy wire connection to any double conductor tape run. Simply place the protruding pins over the respective copper foils of the tapewire, pound in, and an electrical circuit is automatically made between the screw...

CK1049 - Two Pole Terminal Block

CK1049 is a heavy-duty terminal block for interconnecting wires of all sizes.  Electrical connection exists between opposite screw terminals and one or more wires may be attached to each screw terminal.  This two-pole terminal block is 1-1/2"...

MH658 - Male Plug, 6/Pack

Whether you are creating your own miniature lamps or lights for your one-inch (1:12) scale dollhouse or just need to replace an old standard plug, MH658 from Miniature House is just what you are looking for!  White plastic and brass.  Designed...

Double Candle Wall Sconce

One-inch (1:12) scale dollhouse miniature double candle wall sconce with replaceable bi-pin bulbs for 12-volt electric system.  Fixture is brass construction with white candle bodies.  From Houseworks.  Perfect for a dining room or chimney...

MH1050 - Ten-Arm Wrought Iron Chandelier

Ten-arm black wrought iron look candle-style chandelier in one-inch (1:12) scale dollhouse miniature.  Overall size is 2-3/4" by 2-3/4" with about 2" suspension chain from Miniature House.  Uses replaceable flame-tip bulbs MH611. 

MH1053 - Ceiling Light, Frosted With Black Trim

Offering a contemporary flair, the one-inch (1:12) scale dollhouse miniature is a flush mounted, ceiling light with frosted shade and black accents.  Approximately 1-3/8" in diameter, this ceiling lamp extends downward about 3/4" providing a...

MH757 - Beveled Shade Table Lamp

One-inch (1:12) scale dollhouse miniature table lamp with brass base and white shade.  This petite table lamp from Miniature House features a replaceable bulb and works on a 12-volt electrical system.  Lamp measures about 1-3/4" tall by 1" in...

Spike Candlestick

Brass candlestick for one-inch (1:12) scale dollhouse miniature designed for use with pillar style candles.  The candlestick, by Clare Bell Brass Works, is about 5/8" tall (excluding the stabilizer pin which is about 3/16" tall) by about 5/16" in...

WERLF123 - Black and Tan Floor Lamp

This one-inch (1:12) scale dollhouse miniature floor lamp features a brass base with black and tan floral print shade. The 12-volt lamp comes with a brown wire is ready for installation with your preferred plug. Made in the USA by Warren Richardson...

CK842 - 12V Small Pin-in Ceiling Globe

The small pin-in ceiling globe is one of the easiest to install ceiling lights yet! Nails embedded in the globes allow pounding of the fixture directly into a tape run with no additional wiring or electrical connections. Apply power and, presto, you have...

CK806-1 - Plug-in Ceiling Plate

CK806-1 is a black ceiling plate adapter that allows any light to be mounted on the same surface as the tape run and become a truly "plug-in" fixture.2 Special spring-loaded eyelets (CK1023-6) are included with each adapter. These eyelets grip the...